SSDEnabled

Registry value	Default value	Notes	Installer property
SSDEnabled	0	You can set more than one option at the same time by combining the bit values. For example, to enable clients to fetch downloads using SSD and provide them to peers, set the value to 3 (decimal value 1+2 or 0x3). To enable clients to fetch downloads using site and local SSD and provide them to peers, set the value to 7. To enable SSD when you install Nomad, you must specify the MODULE.NOMAD.SSDENABLED installer property and ensure the 1E client is enabled by specifying Switch and BackgroundChannelUrl installer properties. If MODULE.NOMAD.SSDENABLED is specified during installation, the registry value of ContentRegistration is automatically set to 1. If you want to enable SSD as a provider after installation, then you also need to configure the registry values for SSDEnabled and ContentRegistration, in addition to enabling the 1E client. The ContentDistribution registry setting is found under the Platform key. Content Distribution app provides visibility of content distribution activity Single Site Download (SSD) Single Site Peer Backup Assistant - SSPBA (SSPBA) Get Migration Settings task sequence action used to manage computer associations Nomad Pre-caching Nomad Download Pause In legacy versions of Nomad, Platform features were provided using ActiveEfficiency. This required the PlatformURL setting to be configured. This is no longer required. You will see that the PlatformURL registry is used, but this is configured automatically by Nomad on startup by querying the value that the 1E client is using (stored in the 1EClient.conf file). If your network is running over a WLAN or have devices on a wireless network you want to be content providers, set ContentProviderOnWifi=1.	MODULE.NOMAD.SSDENABLED

Registry value

Default value

Notes

Installer property

SSDEnabled

You can set more than one option at the same time by combining the bit values. For example, to enable clients to fetch downloads using SSD and provide them to peers, set the value to 3 (decimal value 1+2 or 0x3).

To enable clients to fetch downloads using site and local SSD and provide them to peers, set the value to 7.

To enable SSD when you install Nomad, you must specify the MODULE.NOMAD.SSDENABLED installer property and ensure the 1E client is enabled by specifying Switch and BackgroundChannelUrl installer properties. If MODULE.NOMAD.SSDENABLED is specified during installation, the registry value of ContentRegistration is automatically set to 1.

If you want to enable SSD as a provider after installation, then you also need to configure the registry values for SSDEnabled and ContentRegistration, in addition to enabling the 1E client. The ContentDistribution registry setting is found under the Platform key.

Content Distribution app provides visibility of content distribution activity
Single Site Download (SSD)
Single Site Peer Backup Assistant - SSPBA (SSPBA)
Get Migration Settings task sequence action used to manage computer associations
Nomad Pre-caching
Nomad Download Pause

In legacy versions of Nomad, Platform features were provided using ActiveEfficiency. This required the PlatformURL setting to be configured. This is no longer required. You will see that the PlatformURL registry is used, but this is configured automatically by Nomad on startup by querying the value that the 1E client is using (stored in the 1EClient.conf file).

If your network is running over a WLAN or have devices on a wireless network you want to be content providers, set ContentProviderOnWifi=1.

MODULE.NOMAD.SSDENABLED

Bit	Hex	Decimal	Description
	0x0	0	SSD is disabled, the Nomad client takes no part in the SSD on the site.
0	0x1	1	SSD is enabled and the Nomad client fetches downloads using SSD. This setting on its own (without provider mode set) should be used with Sensitive server weighting. Provider mode is where a peer gets content from another peer but cannot serve it (it cannot act as a master).
1	0x2	2	SSD is enabled and the Nomad client provides downloads to peers. Enabling this bit causes Nomad to register content with Content Distribution. In practice, this is unlikely to be used on its own. This is automatically disabled for WinPE installations (because cached content is only temporary).
2	0x4	4	Local SSD is enabled and the Nomad client fetches downloads from a local client (also known as a subnet peer master - the term used for local devices which have content but cannot be located during the normal election process because network broadcasts have been disabled) within the subnet. The local SSD feature was introduced to supplement site SSD for clients on networks such as wireless where broadcasts are disabled, to prevent each client becoming its own master and downloading direct from the DP. In a SSD enabled environment, a master queries Content Distribution to get a list of devices on other subnets within the site that have content. With local SSD enabled, the master also queries for devices having content within local subnet. If any local peers with content are available, then the master downloads from them, otherwise it attempts to download from Site peers (other subnets in the site), and if the master still cannot find any peers, it downloads the content direct from the DP. In version 7.0 and later, a master skips using local SSD if it sees broadcast messages from peers. This means clients in mixed network environments can be configured with the same SSDEnabled setting (with Local SSD enabled) and clients can move seamlessly between networks. When on a wireless network (where broadcasts are typically disabled) local SSD can be used. On LAN networks (where broadcasts are typically allowed) local SSD would be skipped because a master is elected and sees broadcast activity from peers. This setting should only be used if networks have broadcasts being disabled (for example wireless networks) and clients are forced to download from the DP as they can't participate in an election. Local SSD requires that a peer on the local subnet be configured to provide downloads to peers, that is at least one client on the subnet must be configured with Bit 1 enabled. To maintain consistency with typical Nomad peer sharing behavior where local SSD is not required, configure all clients with `SSDEnabled=7`. You'll also want to set ContentProviderOnWifi=1. When enabled, the elected master: Queries Content Distribution to get a list of local devices having the content. Queries each of those devices to check if they are available and have the content. The list is ordered by percentage of content the device holds. Repeats the same process for devices on other subnets (existing SSD feature). Stores a list of subnets as well as site devices in memory. Cycles through the list in the following order: Subnet peer master (fetched from list of local devices from Content Distribution) Site master DP. To distinguish between a master derived from Content Distribution and an election, the log records: `Connection::SetDownloadSource = SubnetPeer` (an elected peer) instead of `Connection::SetDownloadSource = Peer` (an SSD peer master).